The hardware ID USB\VID_1F3A&PID_EFE8 refers to a device from in FEL Mode . This mode is used for low-level recovery and flashing firmware onto Allwinner-based devices like tablets and development boards. Driver Details Manufacturer: Allwinner Technology
| Issue | Solution | |--------|-----------| | “Driver is not intended for this platform” | Use Zadig – it bypasses .inf mismatches. | | Device disappears after driver install | Replug USB. If still missing, use Zadig → “Reinstall Driver”. | | Works only once, then fails | Disable USB selective suspend in Power Options. | | Rev 02 specific glitches | Try firmware upgrade via official Hantek software (if model supports). | | Linux/macOS | No driver needed – works with libusb via sigrok. On Linux, grant udev rules. | usb vid_1f3a&pid_efe8&rev_02 3 driver
Compatible with Windows XP through Windows 10/11 (both 32-bit and 64-bit). How to Install the Driver The hardware ID USB\VID_1F3A&PID_EFE8 refers to a device
Once the driver is installed, the driver is effectively "passive." The work is done by the flashing software. | | Device disappears after driver install | Replug USB