Johnson Outboard Serial Number Location ((better))

Look on the left side (port) of the bracket assembly.

: Once found, take a clear photo or write the numbers down in a safe place for future reference, as these tags can degrade over time.

For the vast majority of Johnson outboards built from the early 1970s onward, the serial number is stamped on a metal plate or directly into the metal of the transom bracket (the clamp/swivel bracket that attaches the motor to the boat). johnson outboard serial number location

Remove the engine cowl (the top cover) and look for a small, circular silver or brass plug (often called a "frost plug" or "freeze plug") pressed into the engine block.

This guide provides a systematic breakdown of where to find the serial number on different Johnson outboard models. Look on the left side (port) of the bracket assembly

Johnson and Evinrude were both made by OMC (Outboard Marine Corporation) and later Bombardier. Their serial number locations are nearly identical. If you cannot find a Johnson serial number, consult Evinrude location guides – they share the same engineering.

If the external identification plate is missing, scratched, or has been painted over, you can still find the serial number internally. Remove the engine cowl (the top cover) and

For Johnson outboard motors, the serial number location can vary depending on the model and year. However, here are some common locations where you can find the serial number: