1. Using the BIOS / Intelligent Provisioning (Requires Reboot)
If you open a web browser, navigate to https://<your-iLO-IP-address> , enter Administrator with a blank password, you will likely receive an or "Login failed" error. This is by design to prevent unauthorized network access to servers that haven't been fully configured. ilo 4 hp proliant default password
If you cannot find the physical tag or the password has been changed, you can regain access using the following methods: If you cannot find the physical tag or
If you change the password and lose it, there is no "backdoor" to access the iLO. You will have to repeat the physical reset procedures mentioned above. To regain access, you have three options: However,
If you have inherited a used server or someone has previously configured the iLO, the default password may have been changed. To regain access, you have three options:
However, for iLO 4 on ProLiant Gen8 and Gen9, the standard is Administrator with no password.
Reboot the server and press during POST to enter System Utilities .